Engine Tunning Components
-
$349.00
MSD 8733 LS 2-STEP LAUNCH CONTROL
LS1 LS2 LS3 LS6 LQ4 LQ9 4.8L 5.3L 5.7 6.0 6.2LMSD LS 2-STEP LAUNCH CONTROL
This 2-Step connects right to your late model GM to produce consistent launches and quicker 60-foot times by setting an RPM limit to stage with. Designed for Manual and Automatic Transmissions!
1997+ Gen 3 and Gen 4 LS engines. Designed for Manual and Automatic Transmissions
GM Performance fans will be geeked to learn about this direct plug-in 2-Step Launch Control. The unit is easy to install with factory style connectors for a splice-free installation.
When you’re staged, you can hold the pedal to the floor while the rpm stays at a consistent level producing consistent launches.
Features:
2 Step Rev Limiter for LSx engines
Plug and Play
Can be used with 24x or 58x trigger wheelsBuy Now -
$229.00
Head Bolt Kit-designed to fit 99-02 and newer 5.3L engines
Chevrolet LS Gen II LS Series small block (2003 & earlier), two lengths, 8740, hex
Kit #: 134-3609Maintain your Chevy LS6 engine with this ARP Pro Series cylinder head bolt kit. This head bolt kit is designed to fit a variety of small block Chevy pickup engines. These bolts are made of stainless steel to withstand the extreme temperatures of a vehicle’s engine. They are also rated at a stunning 190,000 psi. The hex style heads and durable studs last for many years and are easy to install with hand or power tools.
Buy Now -
$155.00
Head Bolt Kit
Chevrolet LS Gen III LS Series small block (2004 & later – except LS9) w/ all same length bolts, 8740, hex
Kit #: 134-3610
Specifications
Socket Size(s) 10mm hex, 13mm hexMaintain your Chevy LS6 engine with this ARP Pro Series cylinder head bolt kit. This head bolt kit is designed to fit a variety of small block Chevy pickup engines. These bolts are made of stainless steel to withstand the extreme temperatures of a vehicle’s engine. They are also rated at a stunning 190,000 psi. The hex style heads and durable studs last for many years and are easy to install with hand or power tools.
Buy Now -
$249.00
AEM Electronics
X-Series OBDII Wideband
Air/Fuel Ratio AFR Gauge KitOBDII Connectivity on 08-up Vehicles Only
2 1/16 Gauge Diameter
Emission Code 5AEM’s X-Series OBDII Wideband UEGO AFR Sensor Controller Gauge (PN 30-0334) provides tuners who are using piggyback tuning modules or open source software with the ability to view AFR through the factory CAN-bus stream that is output by the factory ECU, and deliver the most accurate, safe and powerful tune. The 30-0334 X-Series OBDII Wideband Gauge is validated to work with EFILive, HPTuners and DashDaq software.
The X-Series Wideband AFR OBDII Gauge includes an OBDII pass-through connector and 4.9LSU sensor that can be free-air calibrated or used with the factory resistor calibration. Additional wiring for a 0-5v or RS232 Serial output can be added by the user for outputting to a data logger. This OBDII pass-through capability replaces the traditional AEMnet stream available in the 30-0300 X-Series Wideband AFR Gauge Controller.
OBDII CAN-bus OUTPUT
PATENTED X-DIGITAL TECHNOLOGY – It’s The Fastest30-0334
AEM102Buy Now -
$39.99
LS Silverado Sierra Tahoe Yukon Suburban 4.8L 5.3L 6.0L Engine EVAP/Air/EGR Block Off Plate Kit
For all Chevy LS V8 engines, Gasket(s) Included, Hardware Included
- Air block-off plates are intended for use on non-pollution controlled, off-road vehicles only
- To be used for GM LS engines only
- Includes hardware, gaskets and o-rings
- Includes LS Air Block Off Plate, LS EGR Exhaust Block Off Plate, LS EVAP Delete Plug, LS EGR Intake Plug
- Versatile design for an easy installation
Buy Now -
$449.00
OEM GM Chevy LS Lifters & Trays Hydraulic Lifter Rollers Set of 16
GM Chevrolet LS Series engines
(Same lifter used in LS2 and LS7)Set of 16 Lifters = $399
Set of 4 Trays = $49OEM GM Chevy LS Lifters & Trays Hydraulic Lifter Rollers Set of 16
Original, OEM!
Chevy Performance Hydraulic Rollers!
Direct replacements!
These lifters were designed for use by GM to be used in performance engine builds and incorporate improved valving to allow higher RPM capability!GM# 12499225
Buy Now -
$105.00
Walbro Intank Fuel Pump E85 High Performance Pressure Ethanol Pumps
Designed and developed for Universal E85 Ethanol
Designed for engines with more than 750 HP
Award-winning OE technology
High-pressure, high-flow performance OEM technologyFor various car/truck/SUV models!
Contact us for details on fitment/type for your vehicle!
Prices range from $109 to $149Dual channel turbine design for maximum efficiency under high-pressure and high-temperature applications!
Made in USA!
All pumping components have been validated to OEM specifications for approved use in E85/flex fuel applications!
100% Authentic & Genuine Walbro!Buy Now -
$289.00
Nitrous Express (NX)
10lb Nitrous BottleWith Mainline Valve!
Aluminum Bottle!
White!
Empty!
UN3156Brand new!
Buy Now
